🚚 Free Worldwide Shipping on All Orders!Shop Now
HomeStore

Glow-Worm Vertical Flue Terminal - 60/100

Product image 1
Product image 2
Product image 3

Glow-Worm Vertical Flue Terminal - 60/100

Glow-Worm Vertical Flue Terminal - 60/100

The Glow-worm Vertical Flue Terminal (0020230604) is a genuine 60/100mm roof duct for vertical flue termination on Glow-worm's current condensing boiler ranges. Supplied in black with a collar, fixing bracket and cover plate, it provides a complete, weathertight roof penetration for installations where a wall termination isn't practical — typically flat conversions, loft rooms, or properties where planning or siting rules rule out a horizontal flue run.
60/100mm
Flue Diameter
Vertical
Termination Type
Black
Colour
PP
Material
926mm
Length (upper section)
Roof-Sealed
Weather Protection
Gas Safe Installation Requirement
Vertical flue terminations must be installed by a Gas Safe registered engineer and must comply with the clearances and roof penetration requirements set out in the boiler's flue installation manual and current Building Regulations.
Adaptor Required Separately
This terminal transitions the flue to a vertical roof duct, but a separate vertical flue adaptor matched to your specific boiler range is required to connect it to the boiler's horizontal flue spigot. Confirm the correct adaptor part number for your boiler model before ordering — the Compact range, for example, uses adaptor 10031029.
Why This Component
Complete Roof Duct Assembly
Supplied with the fixing bracket, 48mm air-pipe collar and cover plate needed to complete a compliant vertical roof penetration, reducing the number of separate parts an installer needs to source.
Telescopic, Shortenable Design
The lower pipe pushes into the upper pipe as supplied, and the roof duct can be shortened under the roofline to suit different loft heights while keeping the fixing bracket secure.
Anti-Corrosive Construction
Built from durable polypropylene, the terminal resists degradation from acidic condensate over the working life of the boiler, matching the material used throughout the wider Glow-worm flue range.
Compatible Across the Current Range
Fits Glow-worm's ENERGY, ULTIMATE, and EASICOM condensing boiler families using the 60/100mm flue system, subject to fitting the correct boiler-specific adaptor.
Technical Specification
General
Article number 0020230604
Product type Vertical roof duct / terminal
Flue diameter 60/100mm concentric
Colour Black
Material Polypropylene (PP)
Included Items
Vertical roof duct (upper and lower sections) Included
Fixing bracket Included
48mm air-pipe collar Included
Cover plate Included
Compatibility
Compatible boiler ranges Glow-worm ENERGY, ULTIMATE, EASICOM and Compact (60/100mm system)
Required additional part Boiler-specific vertical flue adaptor (sold separately)
Frequently Asked Questions
Does this terminal include everything I need for a vertical flue?
It includes the roof duct, fixing bracket, air-pipe collar and cover plate, but you will also need a boiler-specific vertical flue adaptor, sold separately, to connect the terminal to your boiler's flue spigot.
Can this terminal be shortened to fit my roof?
Yes. The vertical roof duct can be shortened under the roof to suit the installation, provided the fixing bracket remains securely mounted as described in the installation instructions.
Is this suitable for a flat roof?
This terminal is used for both flat and pitched roof installations, but a flat roof typically requires an additional flashing collar accessory — check the flue installation manual for your specific boiler range.
Can I install this myself?
No. Roof penetrations and flue terminations must be installed by a Gas Safe registered engineer to ensure weathertightness and gas safety compliance.
$70.73

Original: $202.09

-65%
Glow-Worm Vertical Flue Terminal - 60/100—

$202.09

$70.73

Product Information

Shipping & Returns

Description

The Glow-worm Vertical Flue Terminal (0020230604) is a genuine 60/100mm roof duct for vertical flue termination on Glow-worm's current condensing boiler ranges. Supplied in black with a collar, fixing bracket and cover plate, it provides a complete, weathertight roof penetration for installations where a wall termination isn't practical — typically flat conversions, loft rooms, or properties where planning or siting rules rule out a horizontal flue run.
60/100mm
Flue Diameter
Vertical
Termination Type
Black
Colour
PP
Material
926mm
Length (upper section)
Roof-Sealed
Weather Protection
Gas Safe Installation Requirement
Vertical flue terminations must be installed by a Gas Safe registered engineer and must comply with the clearances and roof penetration requirements set out in the boiler's flue installation manual and current Building Regulations.
Adaptor Required Separately
This terminal transitions the flue to a vertical roof duct, but a separate vertical flue adaptor matched to your specific boiler range is required to connect it to the boiler's horizontal flue spigot. Confirm the correct adaptor part number for your boiler model before ordering — the Compact range, for example, uses adaptor 10031029.
Why This Component
Complete Roof Duct Assembly
Supplied with the fixing bracket, 48mm air-pipe collar and cover plate needed to complete a compliant vertical roof penetration, reducing the number of separate parts an installer needs to source.
Telescopic, Shortenable Design
The lower pipe pushes into the upper pipe as supplied, and the roof duct can be shortened under the roofline to suit different loft heights while keeping the fixing bracket secure.
Anti-Corrosive Construction
Built from durable polypropylene, the terminal resists degradation from acidic condensate over the working life of the boiler, matching the material used throughout the wider Glow-worm flue range.
Compatible Across the Current Range
Fits Glow-worm's ENERGY, ULTIMATE, and EASICOM condensing boiler families using the 60/100mm flue system, subject to fitting the correct boiler-specific adaptor.
Technical Specification
General
Article number 0020230604
Product type Vertical roof duct / terminal
Flue diameter 60/100mm concentric
Colour Black
Material Polypropylene (PP)
Included Items
Vertical roof duct (upper and lower sections) Included
Fixing bracket Included
48mm air-pipe collar Included
Cover plate Included
Compatibility
Compatible boiler ranges Glow-worm ENERGY, ULTIMATE, EASICOM and Compact (60/100mm system)
Required additional part Boiler-specific vertical flue adaptor (sold separately)
Frequently Asked Questions
Does this terminal include everything I need for a vertical flue?
It includes the roof duct, fixing bracket, air-pipe collar and cover plate, but you will also need a boiler-specific vertical flue adaptor, sold separately, to connect the terminal to your boiler's flue spigot.
Can this terminal be shortened to fit my roof?
Yes. The vertical roof duct can be shortened under the roof to suit the installation, provided the fixing bracket remains securely mounted as described in the installation instructions.
Is this suitable for a flat roof?
This terminal is used for both flat and pitched roof installations, but a flat roof typically requires an additional flashing collar accessory — check the flue installation manual for your specific boiler range.
Can I install this myself?
No. Roof penetrations and flue terminations must be installed by a Gas Safe registered engineer to ensure weathertightness and gas safety compliance.